SC3123 User Guide
AREA CODE
LONG CODE
FLASH TIME
AUTO-IP
P/T MODE
ALARM
year value would flash, use the UP/DOWN key to select value. Press the SET key to enter into next item.
LCD display SET 2 CODE, press the SET key to confirm. LCD will display CODE, press the SET key to enter this mode. Use the UP/DOWN key to select value. Press the SET key to enter into next item.
Area Code can be used to filter the number for incoming calls. E.g. Area code = 75 when there’s incoming call with 75 6554556, it will be displayed as 655 4556 only.
LCD display SET 3 LCODE, press the SET key to enter this mode. LCD will displays LCODE, use the UP/DOWN key to select value. Press the SET key to enter into next item.
To activate this feature, while checking incoming calls using UP key, press REDIAL key twice to add the LONG DIST ACCESS code in front of the number.
LCD display SET 4 FLASH, press the SET key to enter this mode. Use the UP/DOWN key to select value. Press the SET key to enter into next item.
LCD display SET 5 IP, press the SET key to enter this mode. LCD will display AUTO IP OFF and OFF will flashes, use the UP/DOWN key to select value. When LCD displays AUTO IP ON, press SET key. The LCD will display INPUT CODE for you to enter the IP numbers. Use the DEL key to correct any wrong input. After entering all IP number, press the SET key to enter into next item. The outgoing call will automatically use IP mode.
Auto IP allows you to replace a sequence of number with single 0. E.g. Setting 1455 as Auto IP, therefore when you need to dial 1455, just put 0 in front
LCD display SET 6
LCD display SET 7 ALARM, press the SET key to enter this mode. LCD will display ALARM OFF, which will turn the alarm off. Use the UP/DOWN key to select ON or OFF.
This feature is to ensure other telephone is unable to share the same line as your telephone. If another telephone is sharing the same line, there will be constant noise when it is off hook.
5
