User Manual
Try a different location for the base unit, perhaps higher, or further from other electrical equipment.
Check the Battery Level symbol on the display. If it is low, replace the handset on the base unit to recharge the batteries.
Switch off power at the mains socket, wait for a few seconds and then switch back on.
8. "The handset’s battery are running low within an hour or two."
Before you used the handset for the first time, you should have left it on the base unit for up to 15 hours to charge the battery fully.
You may need to replace the battery.
9."Last Number Redial and/or memory dialing don't work on a PBX." When you first make a call, try press the # button for a pause between the outside line access digit and the telephone number.
You should later be able to redial the number.
10 "I cannot transfer a call."
Make sure the other handset is within range of the base unit, and is not busy on a call.
Make sure you are keying in the correct number for the other handset.
24
