Display language, Auto Talk | Shiro SD8101 instruction

User Manual

Display language

You can change the default language to any language you prefer.

1.Press the MENU button then press UP/DOWN button to the location HANDSET.

2.Press the PHONEBOOK button then press UP/DOWN button again to the location LANGUAGE.

3.Press the PHONEBOOK button. The display shows the current language.

4.Press UP/DOWN button to the language you prefer.

5.Press the PHONEBOOKbutton to confirm.

Auto Talk

Normally, you need to press the CALL button to answer an incoming call. But with AUTOTALK turned on, when your handset is resting on the base unit and it rings for an incoming call, you can answer the call by simply lifting the handset. To turn auto-talk ON/OFF:

1.Press the MENU button then UP/DOWN button to HANDSET.

2.Press the PHONEBOOKbutton then UP/DOWN button to

AUTOTALK.

3.Press the PHONEBOOK button again, the display shows ON? / OFF?

4.Press the PHONEBOOK button to confirm.

!If you have turned auto-talk on, do not press the CALL button after

you've answered a call by lifting the handset, otherwise, the call will be disconnected.

To Lock /Unlock the keypad

Press MENU button and “ “ button consecutively to lock or unlock the keypad.

15

Image 16

Shiro SD8101 user manual Display language, Auto Talk, To Lock /Unlock the keypad

Contents

SD8101 Contents What the symbols mean Handset and base unit Phonebook button Setting up your telephone Radio signals between handset and base unitConnection and conditions for use How many phones can you connect? Whats in this pack Installation Choose a suitable site for the base unit Charger pod does not have a connection to the telephone line Important safety information Warranty Information Making and answering calls Phone Book Muting the mouthpieceTo store a number into phonebook To clear a number from phonebook Call Logs To modify change a number in phonebookTo clear all numbers from phonebook To check call records Handset Setting Ringer Volume EXTRinger Volume INT Key tone on and off Ringer Melody INT Ringer Melody EXTYour handset name Auto Talk Display languageTo Lock /Unlock the keypad Base Setting Default PIN No To set call barring numberTo delete call barring number Base Melody Base Volume Least call route LCR function Optional Pabx function To reset base To Set Dial Mode To enter Baby call mode To exit Baby call modeBaby Call To set the Baby Call number Handset registration Resetting the systemTo register a handset Intercom and transfer To make an intercom callTo end an intercom call To transfer a call Troubleshooting Handset does not ring Handset’s battery are running low within an hour or two Electrical power Technical Details Declaration of Conformity