7.To activate the presentation timer, press 
and press 
/ 
to highlight On and press Mode/ enter.
8.A confirmation message displays. Highlight Yes and press Mode/enter on the projector or ENTER on the remote control to confirm. You will see the message “Timer is On” displaying on the screen. The timer start counting at the time the timer is on.
NOTICE
Are you sure to turn on the
presentation timer?
Yes No
To cancel the timer, perform the following steps.
•Using the remote control
Press TIMER ON/SHOW and press 
/ 
to highlight Off and press ENTER.
•Using the OSD menu
1.Enter the SYSTEM SETUP: Basic > Presentation Timer menu and highlight Off. Press Mode/enter. A confirmation message displays.
2.Highlight Yes and press Mode/enter to confirm. You will see the message “Timer is Off ” displaying on the screen.
How to use the TIMER ON/SHOW button?
The button is a multi-functional key.
• If the presentation timer is off, pressing this button displays a confirmation message. You can decide whether to activate the timer or not by following the
•If the timer is already on, pressing this button
displays a confirmation message. You can decide whether to restart, continue or turn off the timer by following the
Remote paging operations
Connect the projector to your PC or notebook with a USB cable prior to using the paging function. See "Connecting a computer" on page 18 for details.
You can operate your display software program (on a connected PC) which responds to page up/ down commands (like Microsoft PowerPoint) by pressing PAGE 
/
on the remote control.
If remote paging function doesn't work, check if the USB connection is correctly made and the mouse driver on your computer is updated to the latest version.
The remote paging function cannot work with Microsoft® Windows®98 operating system. Windows®XP or higher operating systems are recommended.
