BenQ MP723 user manual Picture menu

PICTURE menu

Some picture adjustments are available only when certain input sources are in use. Unavailable adjustments are not shown on the screen.

FUNCTION	DESCRIPTION
(default setting /
value)
Picture Mode	Pre-defined picture modes are provided so you can optimize your
(PC/DVI-A/DVI-	projector image set-up to suit your program type. See "Selecting a picture
	mode" on page 35 for details.
D: Dynamic;
YPbPr/ S-Video/
Video:
Standard)
Reference	Selects an picture mode that most suits your need for the image quality
	and further fine-tune the image based on the selections listed on the same
Mode
	page below. See "Setting the User 1/User 2 mode" on page 36 for details.
Brightness	Adjusts the brightness of the image. See "Adjusting Brightness" on page 36
	for details.
Contrast	Adjusts the degree of difference between dark and light in the image. See
	"Adjusting Contrast" on page 36 for details.
Color	Adjusts the color saturation level -- the amount of each color in a video
	image. See "Adjusting Color" on page 37 for details.
(0)
Tint	Adjusts the red and green color tones of the image. See "Adjusting Tint"
	on page 37 for details.
(0)
Sharpness	Adjusts the image to make it look sharper or softer. See "Adjusting
	Sharpness" on page 37 for details.
(15)
Brilliant	See "Adjusting Brilliant Color" on page 37 for details.
Color
(On)
Color	There are four color temperature settings are available. See "Selecting a
	color temperature" on page 37 for details.
Temperature
(T3)
3D Color	See "3D Color Management" on page 38 for details.
Management
Save	Saves the settings made for User 1 or User 2 mode.
Settings

Operation 49