Installation

1. Choose a suitable site for the base unit

Make sure it is not near to another telephone, nor to other electrical equipment.

2.Plug the mains power lead and the telephone line cord into the bottom of the base unit.

3.Plug the mains adapter into a

230V AC, 50 Hz mains socket with the switch on the socket set to OFF.

Note: The illustration of adaptor may vary from country to country.

4.Switch on mains power at the socket

5.Fit the batteries in the handset(s)

Insert the batteries cell following the batteries polarity indication.

Push the latch inwards, and then slide the cover until it clicks firmly into position.

6.Connect the base unit to the telephone line

7.Plug in the USB dongle into PC USB port

8. Download the latest version of Skype™ from www.skype.com.

This is a Windows-based installation. If you have already installed the Skype™ software, proceed to the next step.