Turning on the Computer and Monitor
With power applied to the monitor and all cables connected you may power up the computer and press the POWER button on the rear of the monitor. The POWER LED will switch from off to green. The monitor will perform an automatic self configuration and begin displaying an image. If no image appears, it may be because the monitor has the wrong video input selected. Press the UP button on the rear of the monitor to change between VGA and
Selection of PC Video Settings
Although the M1500 can display several different video modes, the optimum display image performance occurs when the PC’s video settings match the native resolution of the M1500’s LCD. For this reason it is recommended that you set the video mode to 1024 x 768 with a screen refresh rate of 60 Hz.
This can be done using Window’s control panel or by right clicking on the desktop and choosing “Properties”. This will bring up the “Display Properties” menu. From this menu, select the “Setting” tab and choose 1024 x 768 for the Screen resolution. From the Settings menu, choose “Advanced” and then click on the “Monitor” tab to set the Screen refresh rate to 60 Hz.
Installing the Touch Screen Driver Software
Drivers for the following operating systems are located on the enclosed CD:
Windows Vista*
Windows XP
Windows 2000**
Windows Me
Windows 98
Windows 95
Windows NT 4.0**
DOS and Windows 3.x***
Notes: * The driver for Windows Vista only supports USB touchscreen connections.
**For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver.
***All of the drivers are self extracting and executing except for the DOS and Windows 3.x driver. This has an install.exe file that will need to be run.
12
