Dell S100, S300 manual Installing the Drivers

cWait until the Windows Setup screen appears with S = Specify Additional Device. Press <S> on the keyboard.

dInsert the requested media disk (as applicable) and press <Enter>.

8At the Select the driver to be installed window, select Dell PERC S100, S300 Controller... Click Next to load the driver files.

For Microsoft Windows Server 2003: When you are asked to load additional drivers, press <Enter> to start the Microsoft Windows installation process.

9Perform the remaining operating system installation instructions. Some of the windows require user-specific password and system information. As required, contact your IT administrator for assistance

For Microsoft Windows Server 2003 only: Two warning dialog boxes appear during the Installing Windows segment of the installation:

–At the Software Installation dialog box, click Yes.

–At the Hardware Installation dialog box, click Yes.

NOTE: When the operating system installation process is finished, remove the installation media inserted in step 7.

Performing the PERC S100 Controller or PERC S300 Controller Management Setup Procedure

The PERC S100 adapter or PERC S300 adapter management setup procedure is described in Dell OpenManage Server Administrator Storage Management. To set up a PERC S100 adapter or PERC S300 adapter on your system, see the Storage Management procedures located at the Dell Support website at support.dell.com/manuals.

Installing the Drivers

45