Table
Issue | Likely Causes to Check Corrective Actions |
The RAID 0 goes | Faulty physical disk |
offline and the RAID 1 |
|
becomes degraded in a |
|
PowerEdge R210 |
|
system with two drives. |
|
1 Boot system into
2 Delete the failed RAID 0 and then create a new RAID 0. Now RAID 0 is optimal and RAID 1 is still degraded.
3 Install OS on the RAID 0 and backup RAID 1.
4 Delete and Recreate RAID 1 and restore backup data.
When attempting to | DUPs are not | Use the DOS utilities |
update system | supported. |
|
backplane firmware |
|
|
and or Hard drive |
|
|
firmware using DUPs |
|
|
the updates fail. |
|
|
|
|
|
eSata devices appear in | Issue with the physical | Remove the devices from eSata port |
Ready state in | connection | and plug them into the chassis. |
|
| NOTE: eSATA devices are blocked |
|
| from virtual disk creation. |
|
|
|
During | The function is not | Remove all physical disks except for |
S100/S300 do not | supported. | the last one(s) added. Then proceed |
display greater than |
| with deleting the virtual disks that |
eight Virtual Disks. |
| are not needed. Remember to take |
|
| account of the virtual disks that are |
|
| currently being used. |
|
|
|
Unable to delete | The function is not | Remove all physical disks except for |
Virtual Disks when | supported. | the last one(s) added. Then proceed |
there are more than |
| with deleting the virtual disks that |
eight Virtual Disks |
| are not needed. Remember to take |
present in the system. |
| account of the virtual disks that are |
|
| currently being used. |
|
|
|
Virtual disk rebuild | Rebuild is not | Boot to a supported OS. Rebuild |
status while during | supported in | starts. To view rebuild status, install |
| a supported storage application. |
Troubleshooting
69
