Dell XPS manual Installing a Floppy Drive

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

floppy-drive cable power cable

tabs (2)

floppy drive

4Press inward on the two tabs on the sides of the drive, slide the drive upward, and remove it from the floppy-drive bay.

Installing a Floppy Drive

1Follow the instructions in "Before You Begin" on page 68.

2Open the computer cover (see page 70).

3If you are replacing a drive and the new drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and then inserting and tightening all four screws (two screws on each rail). See the diagram on page 83.

4Gently slide the drive into place until the tabs securely click into position.

86

Removing and Installing Parts