4Open the computer cover (see page 70).
5Locate the
NOTE: When you receive your computer, the jumper plug is attached to pins 1 and 2.
6Close the computer cover (see page 102).
7Connect your computer and monitor to electrical outlets, and turn them on.
8After the Microsoft® Windows® desktop appears on your computer, shut down the computer (see page 25).
9Turn off the monitor and disconnect it from the electrical outlet.
10Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system board.
11Open the computer cover (see page 70).
12Locate the
13Replace the computer cover (see page 102).
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
14Connect your computer and devices to electrical outlets, and turn them on.
Dell Technical Support Policy (U.S. Only)
Dell provides limited technical support for the computer and any
1
2
Repair services are provided pursuant to the terms and conditions of your limited warranty and any optional support service contract purchased with the computer.
All
Appendix
111