Dell XPS manual Notch Memory module Cutouts Crossbar

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

6Align the notch on the bottom of the module with the crossbar in the connector.

notch

memory module

cutouts (2)

crossbar

NOTICE: To avoid breaking the memory module, do not press near the middle of the module.

7Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place.

If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.

8Close the computer cover (see page 102).

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

9Connect your computer and devices to electrical outlets, and then turn them on.

10Click the Start button, right-click My Computer, and then click Properties.

11Click the General tab.

12To verify that the memory is installed correctly, check the amount of memory (RAM) listed.

76

Removing and Installing Parts