Dell XPS manual Not fully seated card Fully seated card Bracket

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

7Prepare the card for installation.

See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your computer.

CAUTION: Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards.

8Place the card in the connector and press down firmly. Ensure that the card is fully seated in the slot.

If the card is full-length, insert the end of the card into the card guide bracket as you lower the card toward its connector on the system board. Insert the card firmly into the card connector on the system board.

not fully seated card

fully seated card	bracket
	within slot

bracket caught outside of slot

9Before you lower the retention arm, ensure that:

•The tops of all cards and filler brackets are flush with the alignment bar.

•The notch in the top of the card or filler bracket fits around the alignment guide.

78

Removing and Installing Parts