TRANSPORT / STORAGE
The Start 8 Portable scooter is designed to be quickly and easily disassembled into sections for transportation and storage. Follow these simple guidelines for disassembly:
Start 8 8 Disassembly (Fig 10 & 11) | 4 | ||
2 | |||
1) | Remove the front basket: Lift basket | ||
| |||
| up and off. |
| |
2) | Fold the seat down and remove: Pull | 1 | |
| yellow swivel seat lever up and lift | ||
|
| ||
| seat up and off. |
| |
3) | Remove battery pack: Turn yellow | 5 | |
| battery pack locking lever to unlock | 3 | |
| position. Lift battery pack up and off |
| |
| using handle (Note: battery pack is |
| |
| secured by Velcro). |
| |
4) | Fold tiller down and lock into place: |
| |
| Loosen tiller adjustment knob, lower | Figure 10 | |
| tiller, and tighten adjustment knob. |
| |
Lock tiller assembly so that it doesn’t
swing sideways by pulling yellow tiller lock lever up and to the right.
5)Detach rear section from front section: Detach lever is located in the rear of the scooter next to the freewheel lever. Slide lever to “detach” and separate rear section from front section.
2
1
3
4
5
7/8/2009SE | 13 |
