Shoprider XtraLite 4, Scootie Free Wheel Operation FIG, Failure to do so may result in injury

FREE WHEEL OPERATION (FIG. 14)

The free wheel release lever (red handle) is located next to the right rear wheel (Fig. 14). To disengage the motor, lift up the lever (the scooter can now be pushed). To re-engage the motor push down on the lever.

WARNING! Always re-engage the free wheeling device after use.

Failure to do so may result in injury.

Anti-tip wheels

The anti-tip wheels are located at the rear of the scooter frame (Fig. 14). The scooter should not be used unless the anti-tipping wheels are in place.

Shoprider® Mobility Products, Inc. is not responsible for damage or injury incurred due to

improper or misuse of the scooter.

Free Wheel

Lever (Red)

Anti-Tip Wheels

Figure 14

STARTING TO DRIVE YOUR SCOOTER

Getting Started

•Select a level area with plenty of space.

•Mount the scooter, either by lifting the arm and sliding onto the seat or rotate the seat outwards and then rotate the seat back to face the tiller.

•Adjust the tiller and seat as previously described.

Starting Scooter Movement

•Ensure that you are seated in a comfortable position.

•Turn the key to the on position.

•Your speed setting should be on 1 or 2.

•Push your right hand thumb lever and the scooter will move forward slowly. The harder you press, the faster the scooter goes but will only reach the speed level that has been selected.

•Release the lever and the scooter will slowly come to a stop as the magnetic brake automatically engages.

9/22/2004 10