Shopsmith none installation manual Procedure for Horizontal Installation

INSTALLATION (1)

The unit can be installed vertically or horizontally. The position of the built-in anti-vibration springs (left and right side), must correspond to the mounting position chosen. If the springs are not set correctly for the type of installation chosen, the anti-vibration compensation will not be effective.

Horizontal Installation

Note

The unit is shipped with the springs installed for horizontal installa- tion.

Vertical Installation

It is necessary to change the spring attachment position.

1)Remove the lock screws on the side of the set using a Phillips screwdriver.

2)Turn the spring attachment to the (V) mark side using a screw- driver.

3)Replace the removed screws on the (V) mark side.

1

1

2

3

Procedure for Horizontal Installation

1

Attach bracket (L) and bracket (R) to each side of the unit, using the hexagonal bolts with washer base (M5 x 8).

2

3

Determine the mounting location, and drill four mounting holes.

Never mount the unit near the fuel tank.

Secure the unit in place, using four self-tapping screws (M5 x 12).

Use RTV (silicone sealer) on screw threads or around the holes to prevent moisture intrusion.

Hexagonal bolt with washer base (M5 x 8)

Drill holes 4mm in diameter.

Self-tapping screw (M5 x 12)

Bracket (R)

4