Front Panel Controls, Connectors, and Indicators
1 | 2 |
|
|
| 6 |
|
| 9 | 10 | 11 |
| 4 | L |
|
|
|
|
|
|
| 13 |
| ±30 | ±15 | 0 | +4 | +8 | +12 | +16 |
| POWER | |
|
|
| ||||||||
| MIC |
|
|
|
|
|
|
|
| |
| R |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
| FP24 |
|
|
| 1kHz |
| METER |
|
| 12 | ||
| 1 | 2 |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| ||
| L C R | L C R |
| SLATE |
|
| TAPE RTN | PHONES | INT EXT |
3 | 5 | 7 | 8 |
Figure 1. Front Panel
1.Input Gain Controls
Sealed, conductive plastic rotary potentiometers.
2.Input Peak/Limiter LEDs
3.
4.Slate Microphone
Condenser microphone with AGC activated by momentary Slate Microphone Switches. Slate Microphone output ap- pears at all outputs.
5.Tone Oscillator/Slate Microphone Switch
Toggle switch activates 1 kHz tone oscillator when switched to the left position and activates the slate microphone when momentarily moved to the right position. Microphone inputs are muted when Tone Oscillator or Slate Microphone are activated.
6.Output Meters
Indicates peak output level in dBu.
7.Meter Brightness Control
Input Panel Connectors and Controls
4
5
TAPE OUT
|
|
| TAPE RTN | |
|
|
| LEVEL |
|
|
|
| L | R |
| 48V | 80 | LINK | R |
|
|
| L | |
| 15V | 160 | ON THRESHOLD | |
1 | 2 |
| LIMITER | 7 |
MIC INPUTS | PHANTOM |
|
|
|
1 | 2 | 3 | 6 |
|
Figure 2. Side Input Panel
1.Mic Inputs
NOTE: You can use Shure A15LA line adapters to con- nect balanced,
2.Phantom Power
8.Tape Return Switch
Toggle switch allows external audio to be monitored in the headphones. The center position is FP24 program audio. The left and right positions monitor tape return audio; the left position is locking, and the right position is momentary.
9.Headphone Connector
For stereo and mono headphones with ¼º connectors.
10.Headphone Volume Control
11.Headphone Peak LED
Illuminates 3 dB before clipping of either channel of the headphone circuit and either channel of Tape Return audio.
12.Power Switch
13.Power LED
3.High Pass Filter Switch
4.Tape Output
3.5 mm (1/8 in.) TRS stereo output (unbalanced) can be used to feed consumer level DAT, MiniDisc, and CD record- ers. Tip = Left, Ring = Right, Sleeve = Ground.
5.Tape Return Level Control
Recessed potentiometers adjust Tape Return level feeding the Headphone Monitor.
6.Limiter Switch
Activates input peak limiter. ON position functions as a dual mono limiter, with each input signal controlling its own limit- er. LINK functions as a stereo limiter, with both left and right inputs controlled simultaneously. Center position of switch turns limiters off.
7.Limiter Threshold Level Control
Recessed potentiometers adjust peak level of limiter activa- tion. Can be independently controlled for each input.
3