ENGLISH

 

ENGLISH

 

RECEIVER MOUNTING

Table Mounting

To mount a receiver on a table or other horizontal surface, attach the four adhesive bumpers to the bottom corners of the receiver and place the receiver on the mounting surface. See Figure 20.

R

RUBBER FEET

TABLE MOUNTING THE UC4 RECEIVER

FIGURE 20

Rack Mounting a Single Receiver

To mount a single receiver in an audio equipment rack, select the single rack mounting kit supplied with the system and proceed as follows:

1.Remove the two screws from each side of the receiver. See Figure 21.

2.Position the large mounting bracket over the holes on one side of the receiver and secure them with the screws removed in Step 1. One of the brackets will be longer than the other.

UC4 RECEIVER

(TOP VIEW)

 

BRACKET

FRONT

 

ANTENNA

ANTENNA

HOLE PLUG

HOLE PLUG

EQUIPMENT RACK

UC4 RECEIVER

(TOP VIEW)

FRONT

BRACKET

RACK MOUNTING A SINGLE UC4 RECEIVER

FIGURE 21

NOTE: If you are not front mounting the antennas with a UA600 Front Mount Conversion Kit, insert the plastic plugs into the bracket holes.

3. Secure the receiver to a 19-inch audio equipment rack, using the four supplied screws.

– 13 –

Page 15
Image 15
Shure UC manual Receiver Mounting, Table Mounting, Rack Mounting a Single Receiver