PRODUCT OVERVIEW | RAID MANAGER |
Single: Install 1 x hard disk drive
JBOD, RAID 0, RAID 1: Install 2 x hard disk drives
1. Select Storage and click on the RAID Manager tab.
The current RAID mode is displayed above the available RAID modes, see the follow- ing figure.
2.Click on a RAID mode, see RAID Typesto select your preference.
3.Click Create Disk-Array.
Creating a RAID Mode
4.A prompt displays, press OK to continue.
5.A prompt displays to confirm the rebuild process, click OK to continue.
The time to rebuild varies depending on RAID Array and HDD size. When it is complete, the Home screen displays.
6.Log in to enter the interface.
Note:
To prevent further dialog prompts, click Prevent this page from creating addi- tional dialogs and then press OK.
