Installing the Gigaset USB Adapter 11
6.After the software installation is finished, plug the Gigaset USB Adapter 11 into the USB port of your computer.
i | The red LED on the Gigaset USB Adapter 11 will light when the Gigaset |
USB Adapter 11 is connected to your computer. | |
|
|
7.Upon hardware detection, Windows OS will install the driver for the card automati- cally.
Note:
◆If you are prompted with the "INF not found" alarm, please click the Browse button to locate the .inf file. Usually it is located on C:\Windows\inf or C:\Winnt\inf.
◆For Windows 2000: If you are prompted with the Digital Signature not Found alarm message, just click Yes to ignore it and continue with the
◆For Windows 98 SE: If prompted, you need to insert your Windows 98 SE installation CD to complete the driver installation.
iIf you need to set up the TCP/IP address or the subnet mask, refer to "Set- ting up TCP/IP" on page 39 for details.
Now you are done with the installation procedure. If the Wireless LAN Monitor Utility does not start automatically, select Start - Programs - Wireless LAN Client Utility - Wireless LAN Monitor Utility. You should be able to see the Wireless LAN Monitor icon appearing on the right side of the taskbar. Proceed to following chapter to configure or
10