Appendix

Setting up TCP/IP

This section contains instructions for configuring the TCP/IP protocol of the Gigaset USB Adapter 11. The IP address policy depends on your wireless network.

For Windows 98, 98 SE and ME you may need the CD containing your i operating system. The operating system data will be required if no net-

work functions have previously been installed on your PC.

1.On the taskbar, select Start - Settings - Control Panel, double-click the Network icon.

2.Click the Configuration tab of the Network dialog box.

3.In the network components list, select the TCP/IP protocol of your Gigaset USB Adapter 11, e.g., Wireless LAN Card, and then click Properties.

4.On the IP Address tab, choose one of the methods as required. Option A: Click Specify an IP address.

In the IP Address box, enter a valid four-component IP address, either a public or pri- vate one as required. If a private IP address is used, the following three blocks of IP addresses are available for private networks:

10.0.0.0 – 10.255.255.255, 172.16.0.0 – 172.31.255.255, 192.168.0.0 – 192.168.255.255

39