Making and Answering Calls
11
Step by Step
Using Call Waiting
Callers can still reach you while you are engaged in an-
other call. A signal alerts you to the waiting call.
You can either ignore or accept the waiting call.
When you accept the waiting call, you can either end
the first call or place it on hold and resume the call later
on.
You can also bar call waiting or the call waiting tone
Æpage 11.

Accepting a Waiting Call (Camp-On)

Precondition: You are engaged in a phone call and hear
a tone (every six seconds).
Ending the first call and answering the waiting call:
IReplace the handset. Your telephone rings.
CAnswer the second call. Lift the handset.
Placing the first call on hold and answering the sec-
ond call:

F>>

Press the key. LED flashes. Enter the code.
You are connected to the call waiting party immediately.
The first party is placed on hold.
Ending the second call and resuming the first one:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key twice.

Preventing and Allowing Call Waiting (Auto-

matic Camp-On)

If this function has been configured (ask the service per-
sonnel), you can prevent or allow a second call
Æpage 11 from being signaled by automatic camp-on
during an ongoing call.
CLift the handset.
Consultation
Consultation
Consultation