Step by Step
Using Other Functions
44
• Do not disturb, code: *97/#97 Æpage14
• Speed-dialing, code: *7 Æpage 25
• Associated service, code: *83 Æpage42
Precondition: You have a telephone that uses tone di-
aling (DTMF dialing) or you can switch your telephone
to tone dialing. The telephone is not connected to the
system.
DSet up a call to the system. Enter the station number
(contact the service personnel).
DWait for a continuous tone (if necessary switch the tele-
phone to tone dialing), then enter the internal number
that has been assigned to you and the associated PIN.
GEnter the code (necessary only if programmed in the
system).
DWait for a dial tone and then enter the code, suchas
*97 for Do not disturb on. Make other inputs as
necessary; (refer to the operating instructions for pulse
and DTMF telephones).
or
DDial the external number.
You can only execute one function at a time, or
set up only one outgoing connection.
The connection is immediately released after
successful activation of a function.
In the case of an external-external call, the
connection is released as soon as either of the
parties ends the call.