Siemens 6DS2-510-0xx00-0xa0 manual Parameter of configuration file SYSPAR.INI

Product Information	February, 1999
BRIDGE CS-L2

6.4 Parameter of configuration file SYS_PAR.INI

The configuration file SYS_PAR.INI includes the parameter for inverting of the DIO- In/Outputs.

If the file SYS_PAR.INI is not present, the operation system uses the default settings from file SYS_PAR.DEF.

Parameter	DIO_MASKE_EIN=xxx		000: Inputs not negated
			255: Inputs negated
Parameter	DIO_MASKE_AUS=xxx		000: Outputs not negated
			255: Outputs negated
___________________________________________
# System parameters 10.05.96
[ID = 99999999		Note: Your Bridge serial number

#DIO settings all inputs and outputs inverted [DIO

DIO_MASKE_EIN =255 DIO_MASKE_AUS =255 [SCHL

S 0000 1111 2222 3333

#End

_______________________________________________________________________

Copyright © SIEMENS AG 1996-1999. All Rights Reserved. S79220-A0978-A-05-7637 Page 18 of 20