en

Do not install the appliance near heat sources (radiators, heat storage tanks, cookers or other appliances which generate heat) and do not install under a hob.

After installing the appliance, ensure that the plug is easily accessible. Some models:

The plastic housing on the water connection contains an electric valve, the connecting cables are in the supply hose. Do not cut through this hose, do not immerse the plastic housing

in water.

Warning

If the appliance is not in a cavity and

a side panel is accessible, the door hinge area must be covered at the side for reasons of safety (risk of injury).

The covers are available as optional accessories from customer service or specialist outlets.

Delivery

Your dishwasher has been checked thoroughly in the factory to ensure that it is in working order. This may cause small water stains. These will disappear after the first wash cycle.

Installation

The required installation dimensions can be found in the installation instructions. Level the appliance with the aid of the height-adjustable feet. Ensure that the appliance is situated securely on the floor.

A built-under or integrated appliance which is installed subsequently as a free-standing appliance must be secured to prevent it from overturning, e.g. by screwing it to the wall or by installing it under a continuous worktop which is screwed to adjacent cupboards.

The appliance can easily be installed in a fitted kitchen between wooden and plastic walls. If the plug is not freely accessible following installation,

an allpole disconnector with a contact opening of at least 3 mm must be fitted on the installation side to satisfy the relevant safety regulations.

Waste-water connection

The required work sequence can be found in the installation instructions.

If required, fit a siphon with an drainage connection.

Connect the waste-water hose to the drainage connection of the siphon with the enclosed parts.

Ensure that the drainage hose is not kinked, crushed or twisted and that there is no cover plate in the drainage to prevent the waste water from flowing out!

Fresh-water connection

Connect the fresh-water connection to the tap according to the installation instructions with the enclosed parts. Ensure that the fresh-water connection is not kinked, crushed or twisted. When replacing the appliance, always use a new water supply hose.

Water pressure:

at least 0.05 MPa (0.5 bar), maximum 1 MPa (10 bar). At a higher water pressure: connect pressure-reducing valve ahead.

Inlet rate:

minimum 10 litres/minute

Water temperature:

cold water preferred; hot water max. temp. 60 °C.

24

Page 23 Page 25
Page 24
Image 24
Siemens 9000407137(8811) Waste-water connection, Fresh-water connection, Water pressure, Inlet rate, Water temperature
Page 23 Page 25

9000407137(8811) specifications

Siemens 9000407137 (8811) is an innovative programmable logic controller (PLC) designed for a variety of industrial applications. With its compact size and advanced features, this device is well-suited for automation tasks in manufacturing, process control, and building management systems. It stands out due to its reliability, flexibility, and ease of integration into existing systems.

One of the main features of the Siemens 9000407137 is its modular design, allowing users to expand the system easily by adding additional input and output modules. This scalability is critical in dynamic environments where requirements can change based on production needs. The device supports various communication protocols, making it versatile for connection with other automation devices and control systems.

The Siemens 9000407137 is equipped with a powerful processor that ensures fast execution of commands and quick response times, crucial for real-time applications. Its built-in memory allows for the storage of a significant amount of user programs and data, further enhancing its functionality in complex automation solutions.

This PLC thrives on Siemens' TIA Portal, which enables seamless programming and configuration. The user-friendly interface of TIA Portal allows for visual programming, helping engineers and technicians to design and implement control logic without extensive programming knowledge. Additionally, the software offers simulation and testing capabilities, allowing users to validate their designs before deployment.

In terms of connectivity, the Siemens 9000407137 supports Ethernet/IP, Profibus, and Profinet standards, facilitating communication with various devices and systems across the industrial landscape. This feature ensures that users can integrate their PLC with high-speed networks, enabling data exchange and remote monitoring capabilities that are essential for modern factory automation.

The device is designed for robust operation in industrial environments, featuring high durability standards and resistance to temperature fluctuations, moisture, and electromagnetic interference. This rugged construction ensures long-term performance, reducing the need for maintenance and minimizing downtime.

Overall, the Siemens 9000407137 (8811) offers a comprehensive solution for industrial automation needs. With its modularity, powerful processing capabilities, user-friendly programming interface, and robust connectivity options, it provides businesses with the tools necessary to enhance production efficiency, improve reliability, and adapt to changing operational requirements. The PLC stands as a reliable choice for industries looking to modernize their automation systems while ensuring optimal performance and flexibility.
Top Page Image Contents