8Switch on/off, PIN entry
this range). The voltage specified on the power supply unit must not be exceeded.
To use the full performance of the bat- tery, the battery must be fully charged and discharged at least five times.
Charge icon not visible
If the battery is totally discharged no charge icon is displayed when the charger is plugged in. It is displayed after 2 hours at most. In this case the battery is fully charged after
Only use the charger provided!
Display while in service
Charge level display during operation
a d g
A beep sounds when the battery is nearly empty. The charge level of the battery is displayed correctly only after uninterrupted charging/discharging. You should not remove the battery unnecessarily and if possible not end charging prematurely.
The charger heats up when used for long periods. This is normal and not dangerous.
Switch on/off, PIN entry
Switch on/off
Press and hold On/Off/End key Bto switch on or off.
Enter PIN
The SIM card can be protected with a
Enter the PIN code using the number keys
(the display shows a series of asterisks, if you make a mistake press §Clear§).
Confirm your input with §OK§. Logging on to the network will take a few seconds.
First time switching on phone, the time and date must be set (p. 21).
Standby mode
When the name of the service provider/ logo appears on the display, the phone is in standby mode and ready for use.
Press and hold the On/Off/End key Bto return to standby mode from any menu option.
General information
User Guide
The following symbols are used to explain
operation:
J
B
A
G Press scroll key at the top/at the bottom to scroll up and down
< Soft key left
>
§Menu§
L
Menu Control
Steps for calling a function are shown in a condensed form in this user guide, e.g. to display the call list for missed calls:
§Menu§ ¢ Call records ¢ Missed calls
This corresponds to:
Open the main menu, select the Call
records menu, then select Missed calls. You have to confirm with §Select§.