Getting started | 5 |
Getting started
Using the SIM card/battery
Your phone's display is delivered with a protective film. Remove this film before getting started. The service provider supplies you with a SIM card on which all the important data for your account is stored. If the SIM card is credit
Press depression 1 to remove the cover downwards in the direction of the arrow 2.
1
2
Insert SIM card 3and push it fully into the locating slot (make sure the angled corner is in the correct position 4).
5
3
4
To remove the SIM card push the card here 5.
Insert the battery sideways into the phone 6, then press downwards 7until it engages.
7
6
8
To remove, press the retaining tab 8 then lift the battery out.
Place cover on phone and push to the upper edge, until it clicks into place 9.
9
Always switch off phone before removing the battery!
Only 3V and 1.8V SIM cards are support- ed. Please contact your service provider if you have an older card.
Charge battery
The battery is not fully charged when de- livered. Plug charger cable into the bottom of the phone, plug power supply unit into a mains power socket and charge for at least two hours. The power supply unit heats up when used for long periods. This is normal and not dangerous.