Security 7

Menu control

The steps needed to reach a function are shown in a condensed form in this user guide.

E.g. to display call list for missed calls: Press §Menu§ ¢Z¢Calls missed

¢§Select§.

This comprises the following steps:

Open main menu, select Z, then select the function Calls missed. You have to confirm with §Select§.

Standby mode

Very often function descriptions begin in standby mode.

The phone is in standby mode and is ready for use when the name of the service provider appears on the display.

Press and hold the On/Off/End key B to return to standby mode from any situation.

Security

§Menu§ ¢m¢Security

¢Select function.

The phone and SIM card are protected against misuse by several security codes.

Keep these confidential numbers in a safe place where you can access them again if required.

Codes

PIN control

You can stop the PIN prompt being activated when the phone is switched on, but you then risk unauthorised use of the phone.

Press §Change§. Enter PIN and confirm with §OK§.

Change PIN

You can change the PIN to any 4- to 8-digit number you find easier to remember.

Enter current PIN and confirm with §OK§. Enter new PIN twice and confirm each time with §OK§.

Change PIN2

(Display only if PIN2 is available). Proceed as with Change PIN.

Change phonecode

You define the phone code (4-8 digits) when you call up a protected function for the first time. It is then valid for all phone- code protected functions.

Clear SIM card barring

If the PIN is entered incorrectly three times, the SIM card is barred. Enter the PUK (MASTER PIN), provided by your service provider with the SIM card, according to instructions. If the PUK (MASTER PIN) has been lost, please contact your service provider.

Preventing accidental activation

Even if PIN control is deactivated confirmation is required to switch on the phone.

This prevents the phone from being switched on accidentally, e. g. when carried in a pocket or whilst you are on an aircraft.

Press and hold the On/Off/End key B and confirm with §OK§. The phone switches on.

Calling

Dialling with number keys

The phone must be switched on (standby mode). Dial number (always with area code, if necessary with international dial- ling code). To dial international0 dialling code press and hold until a "+" is dis- played. Press §Country§ and select country.

Short press §Clear§ to clear the last digit, a long press clears the entire phone A number. To dial press the Call key .