Setup 69
§Menu§ ¢m ¢Call setup ¢Select a function.
Headset
Only in conjunction with an original Siemens headset (p. 94). If an original Siemens Headset is used the profile is automatically activated when the headset is plugged in.
Auto answer
(factory default: off)
Calls are accepted automatically after a few seconds (except where the ringer is switched off or set to beep). You should therefore be wearing the headset. Eavesdropping is possible!
Automatic setting
Accept call with the Call key or PTT key (Push To Talk) when the key lock is activated.
Auto answer
If you do not notice that you phone has accepted a call, there is the danger that the caller may eavesdrop.
Divert§Menu§ | ¢m ¢Divert |
| ¢Select a function. |
You can set the conditions for which calls are diverted to your mailbox or other numbers.
Set up call divert (example):
The most common condition for call divert is, for example:
All calls | b |
nSymbol in the top line of
the display in standby mode.All calls are diverted.
Unansweredb
GSelect Unanswered. (Includes the conditions
Not reachable, No reply,
Busy see below)
§Select§ Press.
Set Select.
JEnter the phone number to which the caller will be diverted (if not already done)
Or
·Select this phone number
from the Phonebook or via §Mailbox§.
§OK§ Confirm. After a short pause, the setting is confirmed by the network.