Configuring image parameters
11 Configuring image parameters
11.1Configuring general image parameters
1.Call up the device homepage. See section 9.1: Calling up the device homepage.
2.Select Image parameters in the Configuration menu. The Image parameters dialogue window opens:
3.Enter the desired settings in this dialogue window.
Brightness | Live video image brightness (0% to 100%) |
Contrast | Live video image contrast (0% to 100%) |
Saturation | Live video image saturation (0% to 100%) |
Flip picture | Activate the check box to rotate the image through 180 degrees (the image now |
| appears upside down). |
4.Click on Save.
11.2Configuring text overlay
1.Call up the device homepage. See section 9.1: Calling up the device homepage.
2.Select Image parameters in the Configuration menu. The Image parameters dialogue window opens:
3.Enter the desired settings in this dialogue window.
Name
Enter a name for the video source here. This is the name that will be overlaid on the live video image if you have activated the appropriate setting.
24
Siemens Building Technologies Fire Safety & Security Products