90 Setup

Data services

Basic setting and activation of the connection profiles for data transmission such as MMS, WAP.

The phone default setting varies from service provider to service pro- vider.

•The settings have already been implemented by the provider. You can start immediately.

•Access profiles have already been created by your provider. Then select and activate profile.

•The access profiles must be configured manually. In this case, you will receive the necessary data from the service provider or via the "Setting Configurator" at (p. 125): www.siemens-mobile.com/ mobilescustomercare

Select profile

I

Select the profile.

C

Confirm selection.

Set profile

 

I

Select the profile.

I

Select CSD settings, and/or

GPRS settings.

§Edit§

Select service and enter

 

data (see below).

§Save§

Save settings.

CSD (Circuit Switched Data)

 

 

 

Dial-up

 

Enter ISP number.

number:

 

 

Call type:

 

Select ISDN or

 

 

analogue.

Login:

 

Enter login name.

Password:

 

Enter password (shown

 

 

as a series of asterisks).

DNS1 / DNS 2:

(optional).

 

 

 

GPRS (General Packet Radio Service)

You can only start to use GPRS once you have activated GPRS on your phone (p. 89).

APN:

Enter service provider

 

address.

Login:

Enter login name.

Password:

Enter password (shown

 

as a series of asterisks).

DNS 1 (opt.):

(optional).

DNS 2 (opt.):

 

§Options§ Open menu.

§Edit§ Open the selection.