Setup 91

HTTP profile

The phone default setting varies from service provider to service pro- vider.

•The settings have already been implemented by the provider. You can start immediately.

•Access profiles have already been created by your provider. Then select and activate profile.

•The access profiles must be con- figured manually.

If necessary, check with your service provider for details. You will find the current settings for the service provider in the Internat at this address:

www.siemens-mobile.com/ mobilescustomercare (p. 125).

I

Make the settings.

Authentication

Activate or deactivate encrypted WAP dial-up (CSD connections only).

Fax/data

Fax/data mode using a PC

With the phone and a connected PC, you can transmit and receive faxes and data. Appropriate software for fax and data communication must be available on your PC and there must be a connection to the phone.

Fax and data services must be enabled by the service provider. There are variations in fax and data recep- tion, depending on the network.

Please ask your service provider about this.

Send voice/fax

b

Set this function on the phone before transmission so that you can switch from voice mode to fax mode.