5
Setting Up the Telephone
Gigaset 4015 Comfort, USA, A31008-G4015-B102-2- vorberei.fm 25.06.0
Leave the handset in the base station for about 12–14 hours the first
time the batteries are charged. The charging status symbol flashes on
the handset, indicating that the batteries are being charged:

Attaching the Belt Clip

Push the belt clip onto the back of the handset until the tabs click into
place.

Turning Handset On/Off

aTo turn handset on/off, hold down the End key – you will hear a con-
firmation beep.
ÝBatteries empty (symbol
flashes) ÛBatteries 2/3 charged
ÜBatteries 1/3 charged ÚBatteries fully charged
Once the initial charging operation is completed, you can re-
place your handset into the base station or charger after each
call. Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
The batteries heat up during charging. This is normal and not
dangerous.
The battery charging status is correctly displayed only after
uninterrupted charging/discharging. You should therefore avo-
id opening the battery compartment unnecessarily.
The handset is turned on as soon as you insert the batteries and
place the handset in the base station.