Siemens HiPath 4000 Conducting calls, Internal/external dialling, Preparing a call

Conducting calls

Note:

Dialling is only possible when the mobile telephone is active. On or message status is then shown on the display, see page 5.

coru Start a call with the talk or speakerphone key.

aork You can end a call with the on-hook key or by placing the mobile tele- phone in the charging shell.

a You can also use the on-hook key to cancel all functions.

Internal/external dialling

Internal calls are calls within the telephone system. External calls are calls in the public telephone network.

Preparing a call

oand X Enter the phone number and, where applicable, correct individual characters with the "Delete" display key.

Note:

You can also start by pressing the talk key and then enter the phone number. Each digit is then immediately dialled.

oor F For internal dialling:

or D Enter the internal phone number of the user or use the control key to open the list of internal users or the mobile telephone’s telephone di- rectory, see page 26.

oor D For external dialling:

Enter the external code, e.g. "0" , plus the external phone number or use the control key to open the mobile telephone’s telephone directo- ry, see also page 26.

19