Siemens IPC427C manual Table of contents

Table of contents

7	Commissioning		37
	7.1	Note before commissioning	37
	7.2	Commissioning - Windows Embedded Standard 2009	38
	7.2.1	Basic commissioning - initial startup	38
	7.3	Commissioning - Windows XP Professional	40
	7.3.1	Basic commissioning - initial startup	40
	7.3.2	Setting up the language selection for Windows XP Professional / Embedded Standard	41
	7.4	Commissioning - other operating systems	42
	7.4.1	Commissioning - guide	42
8	Integration into an Automation System		43
	8.1	Overview	43
9	Functions		45
	9.1	Monitoring Functions	45
	9.1.1	Introduction	45
	9.1.2	Temperature monitoring/display	46
	9.1.3	Watchdog (WD)	47
	9.2	Enhanced Write Filter (EWF)	48
	9.3	File Based Write Filter (FBWF)	50
	9.4	SRAM buffer memory	52
	9.5	Battery monitoring	53
	9.6	Operation without monitor and keyboard	54
10	Expansions and Configurations		55
	10.1	Open the device (front panel)	55
	10.2	Memory expansion	57
	10.2.1	Installing the memory module	57
	10.3	Installing PCI-104 / PC/104 Plus modules	59
	10.3.1	Notes on the modules	59
	10.3.2	Mounting PCI-104 or PC/104 Plus modules	60
	10.4	Installing/Removing Compact Flash Cards	62
	10.4.1	Installation options for Compact Flash cards	62
	10.4.2	Installing/removing an accessible Compact Flash card	63
	10.4.3	Installing/removing a built-in Compact Flash card	66
11	Maintenance and Service		67
	11.1	Removing and Installing Hardware Components	67
	11.1.1	Repairs	67
	11.1.2	Preventive maintenance	68
	11.1.3	Replacing hard disk or SSD drive	69
	11.1.4	Replace the backup battery	71
	11.2	Reinstalling the operating system	73
	11.2.1	Windows Embedded Standard 2009	73
	11.2.1.1	General installation procedure	73
	11.2.1.2	Restoring the software to factory state using the Restore DVD	74
	11.2.2	Windows XP Professional	76
	11.2.2.1	General installation procedure	76
4		SIMATIC IPC427C
		Operating Instructions, 04/2009, A5E02414743-01