Siemens MTX-H15 Main Features and Services, Types of Mobile Station, Feature Implementation

MTX-H15 UMTS-HSDPA terminal modem http://www.matrix.es

1.3 Main Features and Services

The MTX-H15 performs a set of telecom services (TS) according to GSM standard phase 2+, ETSI and ITU-T. The services and functions of the MTX-H15 are implemented by AT commands issued over the USB interface.

1.3.1 Types of Mobile Station

The MTX-H15 is a UMTS/HSDPA and also GSM/GPRS bands mobile station with the characteristics shown in the table below.

Feature		Implementation
General
Frequency bands		UMTS/HSDPA: Single band, 2100MHz
		GSM/GPRS/EDGE: Dual band, 900/1800MHz
GSM class		Small MS
Output power (according to		Class 4 (+33dBm ±2dB) for EGSM900
Release 99)		Class 1 (+30dBm ±2dB) for GSM1800
		Class E2 (+27dBm ± 3dB) for GSM 900 8-PSK
		Class E2 (+26dBm +3 /-4dB) for GSM 1800 8-PSK
		Class 3 (+24dBm +1/-3dB) for UMTS 2100, WCDMA FDD BdI
Power supply		3.2V < VBATT+ < 4.2V
Physical	Dimensions: 50mm x 34mm x 4.5mm Weight: approx. 10g
RoHS		All hardware components fully compliant with EU RoHS Directive
HSDPA features
3GPP Release 5	3.6 Mbps, UL 384 kbps UE CAT. [1-6], 11, 12 supported Compressed mode
		(CM) supported according to 3GPP TS25.212
UMTS features
3GPP Release 4		PS data rate – 384 kbps DL / 384 kbps UL CS data rate – 64 kbps DL / 64 kbps
		UL
GSM / GPRS / EGPRS features
Data transfer		GPRS
		• Multislot Class 10
		• Full PBCCH support
		• Mobile Station Class B
		• Coding Scheme 1 – 4
		EGPRS
		• Multislot Class 10
		• EDGE E2 power class for 8 PSK
		• Downlink coding schemes – CS 1-4, MCS 1-9
		• Uplink coding schemes – CS 1-4, MCS 1-9
		• BEP reporting
		• SRB loopback and test mode B
		• 8-bit, 11-bit RACH
		• PBCCH support
		• 1 phase/2 phase access procedures
		• Link adaptation and IR
		• NACC, extended UL TBF
		• Mobile Station Class B
		CSD
		• V.110, RLP, non-transparent
		• 9.6 kbps

MTX-H15 User Manual V.2.0Pag. 7 Preliminary. Subject to change without prior notice