Siemens GigaVoice voice-operated controls for the 4200 series allow users to place calls
or hear whos calling. The system recognizes up to 20 names and numbers from the
directory and up to four users may record the same name or number. Subscription to Caller
ID from your local telephone company is required.
RECORDING A VOICE-DIAL ENTRY
1Open the Directory by pressing the Navi key on bottom.
2Press Speech.
3Select user 1-4 and press OK.
4Scroll to New Entry and press OK.
5Enter the telephone number.
6Scroll to the name field and enter the name.
7Press Record.
8Press Begin to start recording and speak the name of the desired
entry (for example Anne) to record a voice pattern.
9Repeat the name (for example Anne).
10Press Sa ve.
DIALING WITH YOUR VOICE
1Press the Navi key on top.
2At the prompt, speak the recorded voice pattern (for example Anne).
3When the voice pattern is recognized, the name is played back from
the handset and the number is dialed.
VOICE-ANNOUNCED CALLER ID
If the Caller ID telephone number transmitted for an incoming call corresponds to a
voice-dial entry, the voice pattern is played back on the loudspeakers of the handset
or base station.
1To turn on the Voice-Announced Caller ID feature, press Menu.
2Scroll to Base Settings and press OK.
3Scroll to Spec. Functions and press OK.
4Scroll to Caller ID and press OK (checkmark indicates feature is on).
Customer Care: 1-888-777-0211 or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
VOICE-OPERATED CONTROLS
DE