Warning notes
To avoid injury to persons, damage to property or the environment, the following warning notes should be observed!
Do not open, interfere with or modify the controller!
•All activities (mounting, installation and service work, etc.) must be performed by qualified staff
•When selecting the cables, when making the installation and the electrical connec- tions, observe the regulations of VDE 0100 «Erection of power installations with rated voltages below AC 1000 V» and the relevant national regulations
•Provide
•Check to ensure that wiring is in an orderly state
•Fall or shock can adversely affect the safety functions. Such units must not be put into operation, even if they do not exhibit any damage
Mounting notes
•Ensure that the relevant national safety regulations are complied with
Installation notes
•Please observe the notes given in the user documentation B7865
Commissioning notes
•Prior to commissioning the plant, check to ensure that wiring is in an orderly state
Standards and certificates
Conformity to EEC directives | 89 / 336 EEC | ||
- Electromagnetic compatibility EMC (immunity) | |||
- Electromagnetic compatibility EMC | NE21, EN 50 081 part 1 | ||
NAMUR recommentation | and EN 50 082 part 2 | ||
|
|
|
|
|
|
|
|
ISO 9001: 2000 | ISO 14001: 1996 |
Cert. 00739 | Cert. 38233 |
Service notes
•For service purposes, the controller can be removed from its housing with no need for tools
•The electrical connections are made via the screw terminals located at the rear of the housing
•Each time a unit has been replaced, check to ensure that wiring is in an orderly state and that the wires are firmly connected
Disposal notes
The unit contains electrical and electronic components and must not be disposed of together with household waste.
Local and currently valid legislation must be observed.
2/10
Building Technologies | CC1N7865en |
HVAC Products | 01.09.2005 |
