26 Calling
•Accept the waiting call in addition to the first
§Swap§ Accept the waiting call and place the current call on hold.
Always proceed as above to swap between the two calls.
•Reject the waiting call
§Reject§ Press.
Or
§Divert§ The waiting call is divert- ed, for example,
to mailbox (see page 75, also Ring tones and silent alert must be off).
•Accept the waiting call and end the current call
B End the current call.
ðAccept the new call.
End call(s)
B Press briefly.
Or | Close slider. |
After the Return to held call? display, you have the following choice:
§Yes§ You accept the call on hold.
§No§ You end the second call too.
You can call up to 5 conference participants one after the other and then link them together in a conference call. Some of the functions described may not be supported by your service provider or may have to be enabled specially.
A connection has already been established:
§Options§ Open menu and select Hold. The current connection is maintained.
H/J Select phone number from Contacts or enter it manually.
When the new connection is established …
§Options§ … open the menu and select Conference. The held call is joined.
Repeat procedure until all participants are linked together (up to 5 participants).
Ending
B | All calls in the conference |
finish simultaneously | |
| when the End key is |
| pressed. |
Or | Close slider. |