Industry Sector, IA&DT
3.3Previous configuration
The following requirements are to be met with the help of the Panel.
-It is now possible to operate the ink mixing station via the Panel as well.
-The fill levels of the tanks and of the container are to be indicated as bars and also as numerical value.
-The movement of the mixer motor is to be represented graphically.
-The target quantities are to be entered using the panel.
-The minimum and maximum fill levels of the three tanks can be specified on separate tank screens.
-The Panel can also be used to change operating modes.
-The finished color mixtures are saved as recipe in the Panel.
-The fill levels are monitored and alarms are generated in the event of danger.
-A password must be entered in order to operate the ink mixing station.
-The SIMATIC
PROFINET.
3.4Expanded configuration and task
On the programming device, the STEP 7 Professional V11 configuration software and WinCC Advanced V11 are used to create an additional process visualization for an operator PC.
The operator PC communicates with the operator panel via tags using an HMI HTTP connection. The
The value of a tag in the memory area (address) of the controller is read by the operator panel and transferred via an HMI HTTP connection to the operator PC.
The ink mixing station is remotely monitored and remotely operated using the visualization and the operating screens.
SCE Training Curriculum | Page 10 of 48 | To be used only at Educational and R&D Facilities |
TIA Portal Module |
| Unrestricted / © Siemens AG 2013. All Rights Reserved |
|
| |
|
|
|
