Siemens TIA Portal Module 090-020 manual Preface, Learning objective, Requirements

Industry Sector, IA&DT

1.Preface

Regarding its content, module 090-020 is part of the 'Process visualization' training unit and demonstrates how to configure WinCC visualization between the TP700 Panel and a PC system.

Other programming languages Module 40

Basics of PLC programming Module 10, Module 20

Advanced functions for PLC programming Module 30

PROFIBUS PROFINET

Module 60 Module 70

Plant simulation with SIMIT Module 150

AS interface

Module 50

Safety technology Module 80

Sensor technology Module 110

Process visualization (HMI) Module 90

Drive technology Module 100

Learning objective:

This module describes the runtime services of the TP700 Panel and other functions of the WinCC

Advanced V11 software.

Typical tasks are performed at a sample plant.

∙"Open" and "Save as" of a STEP 7 project

∙Inserting an HMI station

∙Runtime services of the TP700 Comfort Panel

∙Configuring display and operating objects on the operator PC

∙HMI HTTP protocol

∙Trend view

∙Sm@rt Options

Requirements:

To successfully work through this module, the following knowledge is required:

∙Proficiency in working with Windows

∙Basics of PLC programming with the TIA Portal

(for example, module 020-010 – 'Startup' Programming the SIMATIC S7-300 with TIA Portal V11)

∙Blocks for SIMATIC S7-300

(for example, Module 030-010 – Block Types for SIMATIC S7-300)

∙WinCC Advanced with Runtime and TP700 Comfort Panel (e.g. Module 090-010 – S7-300 HMI TP700)

SCE Training Curriculum	Page 4 of 48	To be used only at Educational and R&D Facilities
TIA Portal Module 090-020, Edition 03/2013		Unrestricted / © Siemens AG 2013. All Rights Reserved
SCE_EN_090-020_R1209_ WinCC Advanced Runtime Services