Gigaset 4010 Comfort, CHIN eng,
Settings
“Tone/pulse” switch
On the rare of the base is a “Tone/Pulse” switch for tone or pulse mode selection.
Setting the date and the time
Press the Redial/Pause/Time key for 2 seconds
Press | or | to adjust the Month |
Press Redial/Pause/Time key to set Date | ||
Press | or | to adjust the Date |
Press Redial/Pause/Time key to set the Hour | ||
Press | or | to adjust the Hour |
Press Redial/Pause /Time key to set the Minute | ||
Press | or | to adjust the Minute (or press the Exit key to exit the |
setting) |
|
|
Press Redial/Pause /Time key for confirmation and exit
Setting area code
When sending local number, if the local switch still adds local area code before local number, callback will not be processed. However, the “Local Area Code Setting” function can filter the local area code from number and only let incoming number display. For example, if the incoming call display is “07552288788”, after set “0755” as the local area code, the display will be “2288788”. If the incoming call display is “7552288788”, the local area code should be “755”.
Press and hold the Mem/Prog key for 2 seconds
Press Channel/Query until “CodE” appears on the display
Enter four or three digits of area code. If wrong digits are entered, press Flash/Clear key to modify.
Press Mem/Prog key for confirmation
Press Exit key to exit
7
