Siemens W12 user manual PIN lock, IP dialing and calling back, Setting PIN, Setting Lock Code

Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03

-Press twice the Redial/Pause key.

-Enter 1373110888889888 (the card number and pin).

-Press #.

-Press the Mem/Prog key to confirm.

IP dialing and calling back

Dialing a long-distance number with IP function:

zWhen the handset is in standby, enter the long-distance number and then press the IP key. The base will automatically dial with the IP number added before the long-distance number.

zWhen you are browsing the incoming calls with the handset, select the number you want to call out, then press IP key. The base will automatically dial with the IP number inserted before the long-distance number.

zPress the Talk key on the handset and then press the IP key. You will hear the dial tone. Then you can enter the long-distance number.

Calling back the incoming calls:

zIf the long-distance number is set as “0”, when the incoming number exceeds 8 digits, the base will display “0” before the incoming call number.

PIN lock

In order to prevent others from making long-distance calls or other special calls (for example, “16897888”), you can preset the lock codes. Enter the initial digits of the phone numbers that you want to prevent from calling .For example, “0” or “168” or “1689”(1-4 digits). Please note, prior to setting the lock code, you should set the PIN first (PIN is a number of four digits).

Setting PIN

For example: set 0588 as the PIN. Follow the following steps: Successively press #,#,0, #.

Enter PIN 0588.

Press the Mem/Prog key to confirm. The handset or the base will make a confirmation tone.

Setting Lock Code

For example, if you don’t want any one to call “16897888”, you can set the initial four digits of that number as the lock. Follow the following steps:

Successively press #,#,1, #.

17