Sierra Monitor Corporation ISE30, ZSE30 Specification

Specification

					ZSE30			ISE30
Rated Pressure Range					-100 to 100 kPa			0 to 1 MPa
Set Pressure Range					-101 to 101 kPa			-0.1 to 1 MPa
Withstand Pressure					500 kPa			1.5 MPa
Setting and Display Resolution					0.2 kPa			0.001 MPa
Fluids					Air, inert gases and			incombustible gases
Power Supply Voltage					12 to 24V DC, ±10%,ripple (p-p) 10% or less(Protected against inverse connection)
Current Consumption						45mA or less (No load)
Switch Output Note 1)					NPN or PNP open collector output .1 output
		Max. Load Current					80mA
		Max. Impressed Voltage				30V (During NPN output)
		Residual voltage				1V or less (@80mA load current)
		Response Time			2.5ms or less (chattering-proof function working :20,160,640 or 1280ms selectable)
		Short Circuit Protection					Provided
	Repeatability				±0.2%F.S. ±2 digits or less			±0.2%F.S.±1 digit or less
				Voltage Output	Output Voltage : 1 to 5V ±2.5%F.S. or less (within rated pressure range)
Analog				Note 2)	Linearity : ±1%F.S. or less, Output impedance : Approx. 1kΩ
					Output Current : 4 to 20mA ±2.5%F.S. or less (within rated pressure range)
Output				Current Output
				Note 3)		Linearity : ±1%F.S. or less
					Max. Load Impedance : 300Ω (@12VDC), 600Ω (@24VDC) Min. Load Impedance : 50Ω
Hyster				Hysteresis Mode
esis				Window Comparator		Variable(from 0)
				Mode
Display				Method	3.5 digits 7-segment display, dual-color display(red/green) Sampling rate:5 times/1 sec
Indicator Accuracy					±2%F.S. ±2 digits (@25±3°C)			±2%F.S. ±1 digit (@25±3°C)
Indicator Lamp						Lit when ON (Green)
Temperature Characteristic						2%F.S. or less (@25 C reference)
					±		°
Environment			Enclosure				IP40
			Ambient Temperature		Operation : 0 to 50°C, Storage : -10 to 60°C (No condensation or no freezing)
			Ambient Humidity		Operation⋅Storage : 35 to 85%RH (No condensation)
			Withstand Voltage		1000VAC,1 minute (between lead block and case)
			Insulation Resistance		50MΩ or more @500VDC M (between lead block and case)
			Vibration proof		10 to 150 Hz, 1.5mm double amplitude, 2 hours each in directions of X, Y and Z respectively
			Impact proof		100m/s2, 3 times each in directions of X, Y and Z respectively
Standard						CE marking, UL/CSA(E216656)

Note 1) Analog output cannot be selected when switch output is selected.

Note 2) Both switch output and current output cannot be selected simultaneously when voltage output is selected.

Note 3) Both switch output and voltage output cannot be selected simultaneously when current output is selected.

Piping specification

	Model	01		T1	C4H	C6H	N7H	C4L	C6L	N7L
Port size			R1/8	NPT1/8	−	−	−	−	−	−
		M5⋅0.8		M5⋅0.8
	One-touch fitting		−	−	φ4mm	φ6mm	φ1/4inch	−	−	−
	straight type				φ5/32inch
	One-touch fitting		−	−	−	−	−	φ4mm	φ6mm	φ1/4inch
	elbow type							φ5/32inch
Material		Sensor		pressure sensing part: silicone, Pipe port: C3602 (electroless nickel plating),
		O-ring: HNBR			O-ring: NBR			O-ring: NBR, Fitting: PBT
	Lead wires with		81g			76g			78g
Mass	connector included (2m)
(Weight)	Lead wires with		43g			38g			40g
	connector not included

-8- PS##-OMF0010-C