Sierra Wireless 20070914 - page 145

Circuit Switch Communications
Rev 3.0B Feb.08 140
Commands Specific to the Raven 1x C3210 and C3216
Thecommandstringcannotcontainanyspaces,commas,the
plus(+)symbol,orasemi‐colon(;).IfanATcommandneeded
forthestringcontainsaplusorcomma(forexample,
+IFC=0,0),youwillneedtodesignateabreakcharactersince
youcannotusethestandardbreakof;fortheplustoberead
andareplacementforthecomma.Thebreakandcomma
designationsneedtobeattheendofthe*PTINITcommand
andseparatedwithcommas.DuringtheINITsequence,the
modemlooksattheentirecommandbeforeexecutingtheAT
commandstring.Iftherearereplacementvalues,itwill
performtheappropriatereplacementbeforeexecutingtheAT
command.
Commands Specific to the Raven 1x C3211
NospecialcharactersareneededforBREAKandcomma
thoughsomecommandswillrequirea‘linebreak’,;AT.
Table 2-1: Example for the Raven C3210 and C3216
Command Components
AT*PTINIT=AT&C1S0=1$QCVAD=4%+IFC=0^0,%,^ AT*PTINIT=
Include this portion only if you will not be entering
the command using a AceManager. The
remainder of the example is the command string.
AT
All AT commands must start with “AT”.
&C1S0=1$QCVAD=4%+IFC=0^0
The string is a combination of AT Commands
limited to a maximum of 40 characters.
,% [,break]
Optional “BREAK” character to allow the use of a
command with a “+”. In the example, a “%” is used.
,^ [,comma]
Optional comma replacement character to allow
the use of a command requiring a comma. In the
example, a ^ is used.