Activating your Raven on the Sprint Network
Note: These screens will only be displayed if Private Networking Data Link is selected.
Figure 3-13: Setup Wizard: Connection Test
Green checks in the boxes indicate the tests were successful and your Raven is functioning properly. At this point your modem is configured and activated to work on the Sprint network.
Note: These tests, depending on the strength of your signal, may take a few minutes. Initially, while the tests are being performed, there may be red Xs in the boxes. The Status line will give an indication of the progress of the connection process.
If Test Modem Settings shows the status of your modem is “Data Connection Failed ‐ Waiting for Retry”, “No Service”, “No Carrier”, “Network Negotiation Failed”, “Network Authentication Failed”, “Modem Not Registered”, or the Reg Net light on the modem is not lit, double‐check your device activation information and return to the Activate Modem step to reconfigure your Raven.
8. Data Link Configuration
Data Link is a special account configuration that provides a more secure connection for your Raven and often provides a static IP with authentication on an exclusive server. Consult your Sprint representative for details about Private Networking Data Link if it’s something you need for your account.
Before you start the configuration for Private Networking, Data Link, the connection to the network may be checked.
|
|
|
|
|
|
|
Rev 3.0B Feb.08 |
|
|
|
|
| 28 |
|
|
|
