Sigma projetor manual Step, Connecting the Source Guide Tubes, Operating Instructions

OPERATING INSTRUCTIONS

STEP 2

Connecting the Source Guide Tube(s)

1	Simultaneously pull and rotate the
	spring-loaded outlet port cover a quarter of

a turn in a clockwise direction.

2	Insert the bayonet fitting of the source guide tube
	Into the exposed outlet port.

Align the GREEN MARKINGS on the bayonet fitting and outlet port.

3 Rotate a quarter of a turn counter-clockwise.

4	Rotate the spring-loaded outlet port cover
	an additional 60 degrees in a clockwise direction
	until it stops.

2.3