14
Guarantee to Connected Equipment (and only up to
the applicable aggregate ceiling amount).
3. The Connected Equipment Guarantee does not cover
damage to Connected Equipment or apply if the
Product has been operated in a failure mode or not
in compliance with SIIG operating instructions and
manuals, or if the Connected Equipment has been
operated in a failure mode or not in compliance
with the instructions and manuals of its
manufacturer/vendor.
The Limited Warranty and the Connected Equipment
Guarantee Do Not Apply Unless The Initial Customer:
1. Has properly connected the Product and the
Connected Equipment to properly wired and
grounded outlets (including compliance with
electrical and safety codes of the most current
electrical code (ANS/NFPA 70), without the use of
any adapters, extension cords of other connectors.
2. Has provided a suitable and proper environment
for use and installation of the Product and Connected
Equipment.
3. Has properly installed and operated the SIIG
Product and Connected equipment.
4. Has operated the Product at all times within the
limitations on the Product’s VA capacity as stated in
this User Manual.
5. Has backed up all software on Connected Equipment
on a consistent basis.
6. Has not use the Product with more than one
computer, one printer, and one monitor/screen at
the same time.