SIIG 2S1P manual Windows Vista 32-/64-bit, Click Browse my computer for driver software

3.Insert the driver CD. Right click PCI Parallel Port, click Update Driver Software.

4.Click Browse my computer for driver software.

For 32-bit: Type D:\32bit, then click Next.

(Change D: to match your CD-ROM drive)

For 64-bit: Type D:\64bit, then click Next.

(Change D: to match your CD-ROM drive)

5.At Windows has successfully updated your driver software, click Close.

6.Right click PCI Serial Port, click Update Driver Software.

7.Repeat steps 4-5.

8.Right click PCI Serial Port, click Update Driver Software.

9.Repeat steps 4-5to complete the installation.

Windows Vista (32-/64-bit)

1.Install the board and boot up Windows.

2.At the Found New Hardware, insert the driver CD, click Locate and install driver software (recommended), then click Continue.

5