Step 2: Display Bracket Installation

Step 2: Display Bracket Installation

1To ensure optimal installation, this kit includes various screws of different diameters and lengths.

2Place your TV screen down on a soft, flat surface, and locate the threaded mounting points that are located on the back of the display.

3Determine which screw (A/B/C/D/E/F) is of the correct length by carefully inserting a straw, or toothpick, and mark how deep the mounting point is.

4According to the size of display's hole, choose the corresponding screw (A/B/C/D/E/F) and washer (G/H-1), then thread them in line. Note: when using screw (C/F), no washer is needed. (figures a1, a2, a3)

5If your display has a curved back or a recessed thread mounting point, a spacer (K) must be used. Then choose screw (D/E/F) to match and place the spacer between the mounting bracket and display (figure a5).

6Cut strings to desired length, ensure enough string remains for easy access and use for installation & removal (figure a4).

7Attach Sponge sticker (L) to the bottom inside of each TV rail. These will help to protect the wall surface (figure a6).

5

Page 5
Image 5
SIIG L733, L704, L732, L734 installation instructions Display Bracket Installation